Follow these steps to install additional Canon drivers or software for your printer/scanner.
1. Go to IJ.Start.Cannon Support.
2. Enter your Canon model box. When appearing at the bottom of your model box, click it.
3. Select the driver and download the right image of your model.
4. If you want to download the driver, based on select software or firmware tab. The software has been in the example below.
5. Select the right side of the software or driver file button that you want to download. Select button then closes the button.
6. Note your software list may vary from the examples you've seen here.
7. File Select Download to save on your computer
Download drivers or software
Follow these steps to install Canon drivers or software for your printer/scanner.
Go to the Canon Support page so we can search for the specific printer model you have.
Enter your Canon model in the box. When your model appears below the box, click it.
You will be redirected to the Drivers & Downloads page for the model you searched for in the previous step.
Select the Drivers, Software or Firmware tab depending on what you want to download.
Note Software is shown in the example below.
If you are installing your printer for the first time, have updated your computer operating system, or the printer is unable to communicate with the computer, you will need to download the recommended driver in order to print.
Choose the Select button to the right of the software or driver file you wish to download. Once you press "Select" the button will change to say "Close".
Select Download to save the file to your computer.
Once the download is complete, double-click on the file from the download location. Follow the on-screen instructions to complete the installation.
Hope this helps,
Jimmy Wick